Leica Sprinter 250M - User Manual

Sprinter_01
Sprinter
150/150M/250M
User Manual
Version 1.0
EN, JA, ZH, KO, RU, PL, HU,
EL, CZ, TR, SR
www.sklep.geodezja.pl tel. 0-800 70 30 31, 0-58 7 421 871

Summary

2. Instrument Components

3. Measurement Preparations

3.2 Set-up Instrument

Steps for setting up and leveling the instrument on a tripod.

Target Image Focusing

4. User Interface

Key Functions

Operational Modes

Menu Setting

Details the available menu options and their configurations.

General Settings

Covers settings like contrast, units, auto-off, and language.

6. Operation

6.1 Height and Distance Measurement

Procedure for measuring height and distance electronically.

6.2 Height Difference and Reduced Level Measurement

Steps for measuring height difference and reduced levels.

6.3 Cut & Fill Measurement

Procedure for Cut & Fill measurements.

6.4 BIF Line Levelling Measurement

Explains the BIF line levelling measurement method.

6.5 BF Line Levelling Measurement

6.6 BFFB Line Levelling Measurement

7. Data Transfer DataLoader

8. Check & Adjust

8.1 Electronic Collimation Adjustment

8.3 Optical Collimation; Reticle Adjustment

9. Error Messages

10. Operation Messages

12. Safety Directions

12.1 General Introduction

Overview of safety directions and user responsibilities.

12.2 Intended Use

12.3 Limits of Use

12.4 Responsibilities

12.5 Hazards of Use

Details potential hazards and risks associated with using the product.

13. Technical Data

Leica Sprinter 250M Specifications