Leica TS03 - Station Setup Results; Sighting Target Points; Station Setup Result Display

1. Enter the point ID and height of the target.
2. Measure the Hz angle and repeat the measurement in the ohter
face:
Face
3. Press Set to set the new orientation. The station setup is complete.
The remaining screens are available for all methods except Ori. with Angle and
Local Resection.
Sight the target point and select Meas, or Dist and Store to measure to the
target point.
Key Description
F1 Measure
more points
To return to the Enter Target Point screen to measure more
points.
F2 Measure
in other
face
To measure the same target point in another face.
F3 Access
Tolerances
To change the accuracy limit values.
F4 Compute To calculate and display the station coordinates.
Description of symbols
Symbol
Description
Standard deviation/value within the defined limit
Standard deviation/value exceeds the defined limit
No value calculated
Sight target point
Station Setup Result
76 Apps