Leica TS03 - Line Segmentation for Staking; Segmentation Parameters; Line Segmentation Description

Field Option Description
D Display only Horizontal distance from the measured point
to stake out point. Positive if the stake out
point is further away than the measured
point.
D Display only Height difference from the measured point to
the stake out point. Positive if the stake out
point is higher than the measured point.
Line Display only Grid increment values. The stake out point is
in the direction from the first to the second
reference point.
ΔL Display only Longitudinal distance from the measured
point to the stake out point. Positive if stake
out point is further away than the measured
point.
ΔO Display only Perpendicular distance from the measured
point to the stake out point. Positive if stake
out point is to the right of the measured
point.
•
Either, press Meas to measure and record.
•
Or, press ESC to return to the Enter start chainage of grid! screen and
from there, press Back to return to the Reference Line - Info screen.
7.5.7 Line Segmentation
The line segmentation subapp calculates and displays the stake out elements
for the points along the line, orthogonal (ΔL, ΔO, ΔH) and polar (ΔHz, D , D
). Line Segmentation is limited to the reference line, between the defined
start and end points of the line.
Example Line Segmentation Stakeout
TSOX_040
P1
P2
a
d1
d2
P0
P0 Instrument station
P1 First reference point
P2 Second reference point
a Reference line
d1 Segment length
d2 Misclosure
Press Segment from the Reference Line - Info screen.
Enter either the number of segments, or the length of segments and define
how the remaining line length is treated. This misclosure can be placed at the
start, at the end, at the start and the end or distributed evenly along the line.
Next step
Description
Access
Segment Definition
Apps 91