EasyManua.ls Logo

Leister FUSION 1 - Important Safety Instructions

Leister FUSION 1
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Operating instructions (translation of original operating instructions)
EN
LEISTER FUSION 1
manual extrusion welder
Read through the operating instructions before commissioning for the first time.
Always store these operating instructions with the device.
Do not pass the device on to anyone else without the operating instructions.
In addition to the safety instructions contained in the individual chapters of these operating instructions, the
following provisions must also be followed.
1. Important safety instructions
Congratulations on your purchase of the FUSION 1.
You have chosen a first-class hot-air extrusion welder.
It has been developed and produced in accordance with the very latest standards of technology in the plas-
tics-processing industry. It has also been manufactured using high-quality materials.
Warning
FI
Caution
Danger to life
Disconnect the power plug from the socket before opening the device, as
live components and connections will be exposed.
Danger of fire and explosion
If the device is used improperly, there will be a danger of fire and explosion (e.g., due
to the material overheating), particularly in the vicinity of flammable materials and
explosive gases.
Risk of burning
Do not touch exposed metal parts or escaping material while they are hot. The
device should always be allowed to cool down first. Do not point the hot air flow
or escaping material at people or animals.
If the device is being used on construction sites, an FI protective switch must be
used to protect site personnel.
The nominal voltage specified on the device must match the local line voltage.
If the line voltage fails, then the main switch and the drive must be switched o
(extend hot-air blower).
Protect the device from moisture and wet conditions.
The device may only be used under supervision. Waste heat can come into
contact with flammable materials that are not in view.
The device may only be operated by trained specialists or under their supervi-
sion. Children are not permitted to operate the device under any circumstances.

Related product manuals