OVERVIEW
E-LINK D 6060 • D 4060 11
OVERVIEW
OVERVIEWOVERVIEW
OVERVIEW
General Information
The E-Link control system consists of:
control box with display (Figure: 2)
control unit in switch box (Figure: 1)
control program (software)
Caution!
Prior to any kind of assembly, adjustment and maintenance
work, the E-Link system must be disconnected from power
supply: Switch off control voltage on switch box, Figure: 1.
Caution!
The housing of the E-Link control box is moisture-repellent.
Nevertheless: in order to avoid malfunctions, the control box
must not be exposed to excessive moisture (e.g. pouring
rain, splashing, steam-jet or high-pressure cleaning
machine).
Requirements on the machine
Caution!
Operation with 24 V power supply is not permissible.
Onboard voltage, machine: 12 V
Fuse protection, machine side: 30 A
Figure: 1
Figure: 2
To Next Page
Loading...