THE MENUES
12 E-LINK D 6060 • D 4060
THE MENUES
THE MENUESTHE MENUES
THE MENUES
Note!
Unless otherwise stated:
The E-LINK figures in this manual relate to the WELGER
D 6060.
General Information
The E-Link system provides the following menues:
Menue Task see chapter
MONITOR
Display and operator control in normal machine operation "MONITOR menue"
page 13
SETUP
Setting of machine parameters "SETUP menue"
page 18
SYSTEMINFO
Information about selected system data
"SYSTEMINFO menue"
page 24
DIAGNOSIS
Diagnostic functions for checking the machine
"DIAGNOSIS menue"
page 26
STATISTICS
Machine running time, cumulative counter and day counter
"STATISTICS menue
page 36"
Menue selection
Open menue overview: Press key < >.
Select menue: keys < > and < >
Confirm selection with key < >.
If no menu is to be selected: if no key is pressed for 5 seconds,
automatic return to the MONITOR menue is effected.
Menu: Monitor
Menu: MonitorMenu: Monitor
Menu: Monitor
Systeminfo
Systeminfo Systeminfo
Systeminfo
Diagnosis
Diagnosis Diagnosis
Diagnosis
Statistics
Statistics Statistics
Statistics
To Next Page
Loading...