LELY E-LINK D 6060 - Monitor Menu

MONITOR menue
E-LINK D 6060 • D 4060 13
MONITOR
MONITOR MONITOR
MONITOR MENUE
MENUEMENUE
MENUE
The MONITOR menue is the standard menue. This menue is
used for daily machine operation. The MONITOR menue
appears automatically as soon as the E-Link system is supplied
with power.
The following information is shown in the display:
Central main field
 Machine status
(slip, knotter sensors, knotter fault, bale length ...)
Beside the main field
 Bale counter (day counter)
 Machine running time (day counter)
 Battery voltage
 PTO speed
Below the main field
 Blower (fan) status
 Hydraulic valve block
 Operating parameters
(pressure/combi presetting, mixer, bale length)
Field A:
Blower (fan) status
Field B:
Hydraulic System
Field C:
Operating
parameters
Disconnected Pick-up
Pressure presetting
Stand-by (flashing)/
connected
Cutting device
Combi presetting
Support foot
Mixer
Bottom door
Length of bale
Battery voltage
PTO speed
Bale counter
(day counter)
Machine running time
(day counter)
Knotter sensors
Bar diagram to display
the bale length
B
a
l
es
B
alesBales
B
a
l
es
H
ours
H
oursHours
H
ours
B
a
tt
.
B
att.Batt.
B
a
tt
.
RPM
R
PMRPM
RPM
Pressure
PressurePressure
Pressure