MONITOR menue
E-LINK D 6060 • D 4060 17
MONITOR menue key functions - Overview
Button Operation
Blower ON/OFF
Toggle hydraulic switch
(pick-up – cutting device – support foot – bottom door)
Toggle system presetting
(pressure/combi presetting - mixer - bale length (D4060/6060 only) )
Toggle pressure-on / pressure-off status
Increase selected system presetting
Reduce selected system presetting
+/- simultaneously: trigger el. tying cycle (50 cm monitoring active)
"Remove" error message
Open menue overview
To Next Page
Loading...