LELY E-LINK D 6060 - Page 41

Error messages
E-LINK D 6060 • D 4060 41
Standard error: Wire broken
A broken wire or a non-connected load has been recognized.
The error message can be removed by key depression or
disappears automatically, when the load is connected again.
 Remove/acknowledge error messages: press key < >.
Standard error: Overload compactor
The overload protection "compactor cut-out" responds in case
of compactor overload. In case of compactor overload, the PU
stop is activated (PU = pick-up).
The error message can be removed by key depression or
disappears automatically, when the overload has been
removed.
 Remove/acknowledge error messages: press key < >.
Error
ErrorError
Error
Wire broken
Wire brokenWire broken
Wire broken
Val. B !
Val. B !Val. B !
Val. B !
STOP
STOPSTOP
STOP
Overload
OverloadOverload
Overload
packer!
packer!packer!
packer!