LELY SPLENDIMO 240 MC - Page 19

EN-17
- Check all bolts and nuts for tightness.
Pay particular attention to the bolts which secure the skids and
wear plates (fig. 21).
Tighten loose bolts/nuts to the torques specified below.
- Check whether all safety decals are on the machine and not
damaged (fig. 22).
A (P/N 9.1170.0408.0)
B (P/N 9.1170.0410.2) -2x-
C (P/N 9.1170.0407.6) -2x-
D (P/N 9.1170.0419.4) -2x-
E (P/N 9.1170.0437.1) -3x-
F1 (P/N 9.1170.0125.4)
F2 (P/N 9.1170.0175.5)
G (P/N 9.1170.0173.3)
H (P/N 16.61.175)
M6 M8 M10 M12 M14 M16 M20 M24
Nm 10 25 50 85 135 215 410 710
kgm 1.0 2.5 5.0 8.5 13.5 21.5 41.0 71.0
21
22
A
B
C
D
E
F
C
B
D
EE
G
H
A
B
C D
F1
F2
H
E
G