21
4. Select "Save Project" in the "File" menu. The project file is stored.
Manually splitting your recording
1. Click on the "Skip to Start" button.
2. Select "Add Label at Selection" in the "Project"
menu to determine the starting point of the first
track.
3. Position the cursor at a point between the first and second track where there
is no visible waveform.
4. Right click on this point. A vertical line appears.
5. Select "Add Label at Selection" in the "Project" menu to determine the
starting point of the second track.
6. Repeat steps 3,4 and 5 until the starting points have been determined for all
of the tracks.
7. Enter the names of the tracks in the text fields
next to the markers. These entries will later be
used as file names.
8. Select "Save Project" in the "File" menu. The project file is stored.
To Next Page
Loading...
Need help?
General
