LENCO MC-141 User Manual

1. If you want to fall asleep to music, press and hold SLEEP button.
2. You may adjust the radio or CD player's sleep function to play
 from90,80,70upto10minutesofmusicbeforeshutting
itself off automatically.
TO SET SLEEP FUNCTION
GB 6
CD display
PROGRAM PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmedplaybackenablestracksonadisctobeplayedinthedesiredorder.
Upto60trackscanbeprogrammed.
1. Press the “ MEMORY “ button.
2. Press the skip buttons to select the desired track number.
3. Press“MEMORY“buttonagaintomemorizethetrack.
4. Repeatsteps2and3untilalldesiredtracksareprogrammed.
5. Press the “ PLAY/PAUSE “ button to start. “ MEMORY “ is shown on the CD display.
6. Press“STOP“buttontostopprogrammedplayback.
7. Press “ MEMORY “ and “ PLAY/PAUSE “ buttons to resume
 programmedplayback.
8. Press"STOP/BAND"buttontocleartheprogrammedmemory.
FOR MP3/WMAPLAYBACK
Programmedplaybackenablesfolders/albumsortracksonadisctobeplayedinthedesired
order.Upto60folders/albumsortrackscanbeprogrammed.
1. Press the “ MEMORY “ button.
2. Press the M-UP/FOLDER UP button to select the desired folder.
3. Press“MEMORY“buttonagaintomemorizethefolder.
4. Press the skip buttons to select the desired track number.
5. Press“MEMORY“buttonagaintomemorizethetrack.
6. Repeatsteps2and5untilalldesiredtracksareprogrammed.
7. Press the “ PLAY/PAUSE “ button to start. “ MEMORY “ is shown on the CD display.
8. Press“STOP“buttontostopprogrammedplayback.
9. Press“MEMORY“and“PLAY/PAUSE“buttonstoresumeprogrammedplayback.
10. Press"STOP/BAND"buttontocleartheprogrammedmemory.
Note :Programmingcanonlybemadewhentheplayerisinstopmode.
CD display
MP3/WMA display
90 80 70 60 50 40 30 20 10 90
ID 3 DISPLAY
- Songname,Singernameandalbumnamecanbedisplayedcyclically 
 bypressingID3buttonduringplayingMP3.
- Title-songnameArtist-singernameAlbum-Albumname
- PressID3againtocancelID3display.
TIMER SETTING
1. Press the STANDBY button to put the machine in the standby mode.
2. Pressandholdthe"TIMER/SLEEP"button,"ONTIME"willdisplay,"TIMER"
 andthehourdigitsash.Presstheskipbuttonstosetthehour.
 Pressthe"TIMER/SLEEP"buttontoconrm,theminutesdigitsash,press
 theskipbuttonstosettheminutes.Pressthe"TIMER/SLEEP"
 buttontoconrmand"OFFTIME"willdisplay.Followsameprocedureofsetting
"ONTIME"tosetthe"OFFTIME".
3. Aftersettingthe"OFFTIME",youcanalsoselecttheFUNCTION(CD,TUNER,
AUX)forTIMERbypressing.Pressthe"TIMER/SLEEP"toconrm.
4. Then, press skip buttons to select the volume of the sound,
 pressthe"TIMER/SLEEP"toconrm.
ID3
MEMORY/CLOCK ADJ.
MEMORY/CLOCK ADJ.
TIMER/SLEEP
TIMER/SLEEP

LENCO MC-141 Specifications

CD Section

channels	2 channels
signal to noise ratio	60 dB
sampling frequency	44.1 kHz 8 x over sampling

Radio Section

FM tuning range	87.5 - 108 MHz
AM tuning range	522 - 1620 kHz
FM antenna	Wire antenna

General Specifications

output power	2 W + 2 W
power consumption	17 WATTS
power source	AC : 230V ~ 50Hz

Weight and Dimensions

main unit dimensions	175 (L) x 207 (D) x 133 (H)mm
speaker dimensions	110 (L) x 174 (D) x 133 (H)mm
weight	2.63 Kgs