LENCO SCD-860 - Listening to Fm Radio; Preset Stations

LISTENING TO DAB/DAB+ RADIO
1. Press the MODE button, turn the TUNING button backward or forward toto select DAB mode.
The radio will start automatic scan for DAB stations if it’s the rst time to use the unit.
The display will change to “Scanning…”. A progress bar will show the progress of
the scan and the number of stations found during the scan will also be displayed.
2. When the scan is complete, the radio will select the rst available station and begin
to broadcast. Stations are listed in numerical and then alphabetical order by default.
Note: When the DAB/DAB+ radio station list is stored, it will not search automatically again. Press and hold
SCAN button to search and list station.
3. Press the SELECT button to select the stations in the list.
4. When the desired station is displayed, press the SELECT button to conrm. There will be a short delay while
your radio tunes to your selected station.
Note:
- If no broadcasts are found by DAB/DAB+ scan, “No stations found” appears in the display.
- For a better reception, extend the telescopic antenna or do the full scan again in another place.
- During the search operation, the sound level is automatically muted.
LISTENING TO FM RADIO
Press the MODE button,
turn the TUNING button backward or forward to select FM radio mode.
Note: For a better reception, extend the telescopic antenna.
O
FM
This unit can store 5 FM and 5 DAB/DAB+ stations.
1.Press MODE button,turn the TUNING button backward or forward to select FM or DAB/DAB+ band.
2.Turn the TUNING button backward or forward to select adjust the radio frequency.
3. Long press the PRESET 1 button to conrm the radio station is stored.
4. Turn the TUNING button backward or forward to select adjust another radio frequency.
5. Long press the PRESET 2 button to conrm the radio station is stored.
6. Turn the TUNING button backward or forward to select adjust another radio frequency.
7. Long press the PRESET 3 button to conrm the radio station is stored.
8. Turn the TUNING button backward or forward to select adjust another radio frequency.
9. Long press the PRESET 4 button to conrm the radio station is stored.
10. Turn the TUNING button backward or forward to select adjust another radio frequency.
11. Long press the PRESET 5 button to conrm the radio station is stored.
Listening to preset stations by short pressing the PRESET 1-5 button.
Or press the PRESET button to enter the PRESET RECALL state.
Turn the TUNING button forward and backward to recall a preset radio station.
Note: If you choose a station that hasn’t been allocated, “Empty” will be displayed. If the station has been
allocated before, the FM frequency or DAB station name will be showed.
PRESET STATIONS
GB 4