PROGRAM, MODE
The operation of PROGRAM, MODE are as the same as that of CD / MP3. Please refer to CD / MP3
OPERATION.
USB OPERATION
E-9
GENERAL OPER
ATION
PLAY / PAUSE / USB
Press to start playing tracks from the USB device.
Press again to stop playing USB operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the sound.
STOP Press to stop all USB operation.
PLAYBACK
1. Plug or slot in USB device to the port. (Make sure no disc on disc tray)
2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
3. Press and hold the “PLAY / PAUSE / USB” button for a few seconds to entry USB mode.
4. Playback will start automatically from the first track.
5. Press the “STOP” button when finished.
6. Press the “PLAY / PAUSE / USB” button again, playback will start from the first t
rack.
To Next Page
Loading...
