LENCO SCR-96 User Manual

TAPE OPERATION
E-6
GENERAL OPER
ATION
PAUSE Press to stop playing tape operation temporarily.
Press again to resume tape operation.
STOP / EJECT Press to stop tape operation.
Press again to open the cassette door after the tape spools stop turning.
FAST FORWARD & Press to start rapid tape winding either forward or reverse direction.
REWIND
PLAY Press to start playing tape.
RECORD Press it together with “PLAY” button to start recording.
PLAYBACK
1. Set the “FUNCTION” selector to “TAPE” mode.
2. Press the “STOP / EJECT” button to open the cassette door and insert your tape.
3. Close the cassette door.
4. Press the “PLAY” button to start playing
tape.
5. Adjust the “VOLUME” control to the desired level.
6. Press the “PAUSE” button when you want to stop playing tape operation temporarily.
7. Press the “STOP / EJECT” button when finished.
RECORDING
1. Press the “STOP / EJECT” button to open the cassette door and insert a blank tape.
2. Select the source you want to record.
To record from radio - Set the “FUNCTION” selector to “RADIO” mode and adjust the desired station.
To record from CD / MP3 - Place a disc on the CD compartment. Set the “FUNCTION” selector to
“CD / MP3 / USB” mode and select the desired track.
To record from USB - Plug or slot in USB device to the port. (Make sure no disc on disc tray. )
Set the “FUNCTION” selector to “CD / MP3 / USB” mode and select the desired track.
3. Press the “RECORD” button together with the “PLAY” button to start recording.
4. Press the “STOP / EJECT” button when finished.

LENCO SCR-96 Specifications

General

Brand	LENCO
Model	SCR-96
Category	CD Player
Language	English