Lennox CLIMATIC series User Manual

• 36 •

  
  
  
  
  
  
  

  
  
  
  
  
  
  



 
 
 
 














CLIMATIC RT_UNITARY-IOM-1508-E
COMMUNICATION
The submenus contains 2 types of data: the read only data (like a temperature probe for example) and the read/write setpoints (like
the cooling ambiant setpoint for example). The data are identifi ed by a cursor symbol “>” (and by a close-padlock in the upper right
corner) whereas the setpoint are identify by a symbol “>>” (and by an open-padlock in the upper right corner).
To modify a setting, move the cursor on the desired item and press the “” key. A new screen displays information concerning this
set point. To modify it, use the “” and “” keys and validate by pressing the “” key. If the setting is customizable according to the
schedule mode, press the “PRG” key to select different value for the Day, Day I, Day II & Night mode.
: to quickly increment or decrement the setting, hold the “” or “” keys during some time.
Customizable setting for different mode
Cursor symbol for set point
User save value
Minimum value
Factory value
Maximum value
Cursor symbol for data
Actual set point

Lennox CLIMATIC series Specifications

General

Brand	Lennox
Model	CLIMATIC series
Category	Controller
Language	English