Page 47
Field Wiring Applications (Continued)
Jumper Settings (See figure 4)
Thermostat
E20
Term. Strip
Y1 to Y2
Wiring Connections
FM21 Heat Pump / 1
Cool
SINGLE Leave Installed
CONTROL
TERM. STRIP
FM21
75VA, 24V
TRANSFORMER*
*Disconnect existing
furnace transformer and re-
place with 75VA, 24V trans-
former if defrost option to be
used.
NOTE − Wiring connections to
outdoor unit and thermostat
made at FM21 control board
per FM21 instructions.
NOTE −
Remove Y1/Y2
jumper for two−
stage cooling.
To Next Page
Loading...
