30
240012994 Rev. B [08/31/2020]
6.7 Manufacturer Recommendation - Strainer
6 - HYDRONIC PIPING
Potable water
IN
Potable water
OUT
Manufacturer Recommendation
Manufacturer strongly recommends the use of a strainer ltering potable water before entering
the boiler. The strainer prevents any sedimentation and debris from your water supply piping
from entering the boiler. Debris carried from the water supply will clog DHW water ow sensor,
potentially resulting in signicant operation issues.
Locate the stainer as close to the boiler as possible and place on DHW (domestic hot water) inlet
connection located at bottom of the boiler.
To Next Page
Loading...
Need help?
General
