37
Figure B-1a - Horizontal Installations
Figure B-1b - Vertical Installations
APPENDIX B-2 - VENT DAMPER HARNESS
B.1 Vent Damper Harness - Molex Plugs
WARNING
!
Brown
Orange
Control End of wiring harness
OPEN
Brown
Orange
1.
2.
Damper end of wiring harness:
proper position.
B.
should be present.
i. not in
ii.
continue to step iii.
iii.
setting.
iv.
•
•
v.
then ignite.
•
•
NOTE:
and wiring harness.
Note
Check Molex Plugs on Vent Damper Harness:
connector on control board between two center
holes using ~
i.
ii.
Note
labeled prior to disconnection. Wiring errors
use the service switch.
PN 240012889 Rev. A [07/31/2020]
To Next Page
Loading...
