Page 110 - IOM / Rooftop Smart and Linéa™ Range
The unit should be inspected at least once a year by a
qualified service technician.
LUBRICATION
All motor bearings are prelubricated. No further lubrication
is required.
FILTERS
Filters should be checked monthly and cleaned or replaced
OUTDOOR COIL
1. Check and clean coil if necessary.
2. Check connecting lines for evidence of oil leaks.
INDOOR COIL
1. Check and clean coil if necessary.
2. Check connecting lines for evidence of oil leaks.
3. Check condensate drain pan and line, clean if
necessary.
ELECTRICAL
1. Check all wiring both factory and field for loose con-
nections.
2. Check for correct voltage at unit (unit operating).
3. Check amp-draw on both outdoor fan motor and blower
motor.
PLANNED MAINTENANCEPLANNED MAINTENANCE
PLANNED MAINTENANCEPLANNED MAINTENANCE
PLANNED MAINTENANCE
To Next Page
Loading...
