To Next PageTo Next Page
Need help?Do you have a question about the Lennox SL25XPV-048 and is the answer not in the manual?
General| Model | SL25XPV-048 |
|---|---|
| Type | Variable Capacity Air Conditioner |
| SEER Rating | Up to 26 |
| Refrigerant | R-410A |
| Energy Star Certified | Yes |
| Voltage | 208/230V |
| Phase | 1 |
| Cooling Capacity | 48000 BTU/h |
| Compressor Type | Inverter |
| HSPF | Not Applicable (Air Conditioner) |
Precautions for handling panels to prevent injury or damage.
Instructions for flushing systems with mineral oil or POE oil before installing PVE oil units.
Warning about using nitrogen for pressurization and required regulator pressure.
Caution regarding hazardous materials in brazing alloys and safe handling practices.
Warning about fire danger from brazing a pressurized system and checking pressures.
Procedure for removing a fixed orifice metering device from an uncased coil.
Procedure for removing an expansion valve from an uncased coil.
Steps to connect gauges and equipment for flushing the system.
Steps to remove the piping panel and prepare the refrigerant line set ends.
Procedure for removing service port caps and valve cores.
Instructions for attaching the manifold gauge set for brazing operations.
Procedure for installing the check/expansion valve metering device at the indoor coil.
Warning against deep vacuum operation to prevent compressor damage.
Warning about high voltage and waiting period after power removal.
Warning about using aluminum wire with the product.
Warning about property damage from improperly sized wiring and breakers.
Precautions to avoid electrostatic discharge affecting electronic components.
Warning about electric shock hazard and the need for proper grounding.
