IOM / Rooftop Smart and Linéa™ Range - Page 71
USING THE KP02 MAINTENANCE CONTROL DISPLAUSING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLAUSING THE KP02 MAINTENANCE CONTROL DISPLA
USING THE KP02 MAINTENANCE CONTROL DISPLA
YY
YY
Y
LIST OF SETPOINTS
1st Level
Min. Factory Maxi.
0 Password to access level 2 setpoints and variables 0 # 255
1 Temperature, required setpoint for room, day mode 8.0 21.0 35.0
2 (Used by KP17 only)
KP17 Remote control, overide, occupied mode Off Off On
3 (Used by KP17 only)
KP17 Remote control, overide, automatic mode Off Off On
4 (Used by KP17 only)
KP17 Remote control, overide, unoccupied mode Off Off On
5 Fault reset Off Off On
6 Remote control, On / Off, unit Off Off On
7
(Special software request)
Remote control, On / Off, customer output KP12/2
Off Off On
8 (Used for setting up different time zones) 0 0 7
Mode, Selection
0 = Day 1 = Week-end 2 = Night 3 =
4 = Morning 5 = Midday 6 = Evening 7 = BMS
9 Defines end of weekend/Start of week (1 = Sunday, 2 = Monday, etc) 1 # 7
Mode, day of the weekn start of mode
10 (Used with setpoint 8 - mode selection - to define the hour of the start time) 0 # 23
Mode, hour, start of mode
11 Used with setpoint 8 - mode selection - to define the minute of the start time 0 # 59
Mode, minute, start of mode
12 Defines end of week/Start of weekend (6 = Friday, 7 = Saturday, etc) 1 # 7
Mode,day of the week, end of mode
13 Used with setpoint 8 - mode selection - to define the hour of the stop time 0 # 23
Mode, hour, end of mode
14 Used with setpoint 8 - mode selection - to define the minute of the stop time 0 # 59
Mode, minute, end of mode
15 Defines day mode deadzone, other time zones = cooling setpoint) 8.0 # 35.0
Mode, temperture, room cooling setpoint
16 Defines day mode deadzone (other time zones = heating setpoint) 8.0 # 35.0
Mode, temperature, room heating setpoint
17 (FLEXY™ only)*
On = Absolute humidity (g/kg) / Off = Relative humidity (%) Off Off On
18 (FLEXY™ only)*
Mode, relative humidity (%), room minimum setpoint required 0 # 100
19 (FLEXY™ only)*
Room mode, Relative humidity (%), maximum setpoint required 0 # 100
20 (FLEXY™ only)*
Mode, Absolute humidity (g/kg), room minimum setpoint required 0.0 # 30.0
21 (FLEXY™ only)*
Mode, Absolute humidity (g/kg), room maximum setpoint required 0.0 # 30.0
22 Mode, Percentage, Minimum fresh air 0 # 100
23 Mode, Fan activity in control zone (cooling mode/heating mode) Off # On
24 Mode, Fan activity in dead zone Off # On
25 (Special application request only)
Mode, Fan automation, dead zone Off # On
26 (FLEXY™ only)*
Mode, Fan low speed, control zone Off # On
* : FLEXY™ is an other range of ROOFTOP. For more informations, please consult your regional office
To Next Page
Loading...
