Chapter 3. 3-1
Chapter 3. Reference information
3
This section contains monitor specifications, instructions to manually install the monitor driver,
troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model 66BE-KAC2-WW
Dimensions Depth 174.94 mm (6.89 in.)
Height 475.82 mm (18.73 in.)
Width 612.49 mm (24.11 in.)
Panel Size 27.0 in.
Backlight LED
Aspect ratio 16:9
Stand Tilt -5° to 22°
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size 685.8 mm (27.0 inch)
Maximum height 336.312mm (13.24 inch)
Maximum width 597.88 mm (23.54 inch)
Pixel pitch 0.3114 mm (0.012 inch)
Power input Supply voltage 100-240V AC
50-60Hz
Max supply current 1.5 A
Power consumption Normal operation <24 W (max)
<18 W (typical)
Note: Power
consumption figures
are for the monitor
and the power supply
combined
Standby/Suspend <0.5 W
Off <0.3 W
Video input (HDMI) Interface HDMI
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 1920 pixels (max)
Vertical addressability 1080 lines (max)
Clock frequency 170 MHz
To Next Page
Loading...
Need help?
General
