Server controls, LEDs, and connectors
This section describes the controls, light-emitting diodes (LEDs), and connectors.
Front view
The following illustration shows the controls, light-emitting diodes (LEDs), and
connectors on the front of the 3.5-inch model server.
1 Operator information panel 6 Hard disk drive status LED (amber)
2 USB 5 connector 7 Rack release latch
3 USB 6 connector 8 CD/DVD eject button
4 Video connector 9 CD/DVD drive activity LED
5 Hard disk drive activity LED (green) 10 Rack release latch
The following illustration shows the controls, light-emitting diodes (LEDs), and
connectors on the front of the 2.5-inch model server.
1 Operator information panel 7 Hard disk drive status LED (amber)
2 USB 5 connector 8 Rack release latch
3 USB 6 connector 9 CD/DVD eject button
4 Video connector 10 CD/DVD drive activity LED
5 Tape drive bay 11 Rack release latch
6 Hard disk drive activity LED (green)
Operator information panel: This panel contains controls, LEDs, and connectors.
The following illustration shows the controls, LEDs, and connectors on the operator
information panel.
Chapter 1. Introduction 5
To Next Page
Loading...
