6. Remove the retention clip from the drive.
7. If you are instructed to return the CD-RW/DVD drive, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing a CD-RW/DVD drive
To install the replacement CD-RW/DVD drive, complete the following steps.
1 Release tab
2 CD/DVD drive
1. Follow the instructions that come with the drive to set any jumpers or switches.
1 Drive retention clip
2 Alignment pins
2. Attach the drive-retention clip to the side of the drive.
3. Slide the drive into the CD/DVD drive bay until the drive clicks into place.
4. Install the cover (see “Installing the cover” on page 57).
5. Slide the server into the rack.
6. Reconnect the external cables; then, reconnect the power cords and turn on the
peripheral devices and the server.
76 ThinkServer RD120 server Machine Types 6444, 6445, 6446, and 6447: Hardware Maintenance Manual
To Next Page
Loading...
