2 : ADD USER
CAUTION
The user places his finger on the fingerprint sensor, and when prompted, enters the fingerprint
again, and the user places the same finger on the sensor. The voice prompt "Registration successful".
a. To enter a fingerprint, the user needs to record the fingerprint 5 times continuously.
b. When collecting fingerprints, try to collect as many times as possible from different locations on
the same finger, so that the subsequent verification of fingerprints is easier to be recognized.
2.2 : ADD FINGERPRINT
1. Password Managemet
2. Fingerprint Management
3. Key Card Management
4. System Settings
Follow the prompts to select the ones
you want to add Password, fingerprint
or key card
Press the [*] [#] key, please use the administrator password for verification. After entering the main
menu, the user can press the corresponding number key to select the operation according to the
menu number.
The user enters the password, press the [#] key to confirm, press the [#] key to confirm, and enter the
password again when prompted, and the user enters the same password. Support the virtual password
function, you can add numbers before and after the correct password at will to achieve password
input and verification unlocking (up to 32 digits including virtual password bits during verification,
1
2
3
2.1 : ADD PASSWORD
The user places the card close to the antenna receiving area and the voice prompt "Registration
successful".
2.1 : ADD KEY CARD
To Next Page
