Lenovo ThinkServer TS130 - Viewing and Changing Settings; Using Passwords

Table42.ItemsundertheStartupmenu(continued)
ItemOptionDescription
OptionKeysDisplayStyle[Normal]/LegacyControlthepromptsdisplayedonthe
POSTlogoscreen.
•Normal:DuringthePOST,this
messagewillbedisplayed:To
interruptnormalstartup,press
Enter.
•Legacy:DuringthePOST,this
messagewillbedisplayed:Press
F1toenterSetupandpressF12to
displayBootMenu.
StartupDeviceMenuPrompt[Enabled]/DisabledEnableordisabletheStartupDevice
MenuPrompt.Thisfunctionenables
theStartupDeviceMenutobe
displayedbypressingF12afterthe
serveristurnedon.TheStartup
DeviceMenuenablesthesequence
ofstartupdevicestobetemporarily
changed.
Note:[]indicatesthedefaultsetting.
Table43.ItemsundertheExitmenu
ItemDescription
SaveChangesandExitExittheSetupUtilityprogramaftersavingthechanges.
DiscardChangesandExitExittheSetupUtilityprogramwithoutsavinganychanges.
LoadOptimalDefaultsRestore/Loaddefaultvaluesforallthesetupoptions.
Viewingandchangingsettings
TheSetupUtilityprogrammenulistsvariousitemsaboutthesystemconguration.Tovieworchange
settings,starttheSetupUtilityprogram.See“StartingtheSetupUtilityprogram”onpage83.Then,follow
theinstructionsonthescreen.
YoucanuseeitherthekeyboardorthemousetonavigatethroughBIOSmenuchoices.Thekeysusedto
performvarioustasksaredisplayedatthebottomofeachscreen.
Usingpasswords
ByusingtheSetupUtilityprogram,youcansetpasswordstopreventunauthorizedaccesstoyourcomputer
anddata.Thefollowingtypesofpasswordsareavailable:
•Power-OnPassword
•AdministratorPassword
•HardDiskPassword
Youdonothavetosetapasswordtouseyourcomputer.However,usingpasswordsimprovescomputing
security.Ifyoudecidetosetapassword,readthefollowingsections.
96ThinkServerTS130HardwareMaintenanceManual