Lenovo ThinkServer TS130 - Installing, Removing, or Replacing Hardware Devices; Replacing the Power Supply Assembly

5.Pressthebluereleasetab1downward,slidetheharddiskdrivecage2totherearoftheserver,and
thenpivotitoutwardtocompletelyremovethedrivecagefromthechassis.Then,pullontheblue
handle3toremovetheharddiskdrivefromthedrivecage.
Figure17.Removingtheprimaryharddiskdrive
6.Flexthesidesofthebluebrackettoremovetheharddiskdrivefromthebracket.
7.Toinstallanewharddiskdriveintothebluebracket,exthesidesofthebracketandalignpin1,pin2,
pin3,andpin4onthebracketwiththecorrespondingholesintheharddiskdrive.Donottouchthe
circuitboard5onthebottomoftheharddiskdrive.
Note:Ifyouareinstallinga2.5-inchharddiskdrive,installtheharddiskdriveintoa2.5-inchto3.5-inch
harddiskdrivetrayrstandtheninstallthetrayintothebluebracket.
Figure18.Installingtheharddiskdriveintothebracket
44ThinkServerTS130HardwareMaintenanceManual