Connector Description
Audio line-in connector Used to receive audio signals from an external audio device,
such as a stereo system. When you attach an external audio
device, a cable connects the audio line-out connector of the
device to the audio line-in connector of the server.
Audio line-out connector Used to send audio signals from the server to external devices,
such as powered stereo speakers (speakers with built-in
amplifiers), headphones, multimedia keyboards, or the audio
line-in connector on a stereo system or other external recording
device.
DisplayPort connector Used to attach a high-performance monitor, a direct-drive
monitor, or other devices that use a DisplayPort connector.
Ethernet connector Used to attach an Ethernet cable for a local area network (LAN).
Note: To operate the server within FCC Class B limits, use a
Category 5 Ethernet cable.
Microphone connector Used to attach a microphone to your server when you want to
record sound or if you use speech-recognition software.
Serial port Used to attach an external modem, a serial printer, or other
devices that use a 9-pin serial port.
USB connector Used to attach a device that requires a USB connector, such as a
USB keyboard, a USB mouse, a USB scanner, or a USB printer. If
you have more than eight USB devices, you can purchase a USB
hub, which you can use to connect additional USB devices.
VGA monitor connector Used to attach a VGA monitor or other devices that use a VGA
monitor connector.
Chapter 5. Locating Server Controls and connectors 25
To Next Page
Loading...
