Lenovo ThinkSystem HR650X - Features and Specifications

14
1.3 FEATURES AND SPECIFICATIONS
The following information is a summary of the features and specifications of the server.
Server
Technical parameters
performance
Processor
Two
Intel Xeon
Skylake Server 2S
supports
up to 28 cores
Support 2 UPI links @10.4GT/s and future 11.2GT/s UPI
Memory
DDR4 2666/2400
/2133/1866, LRDIMM/RDIMM
Number of slots: 24 DIMMs or 16 DIMMs
System
hard disk
support
Front : Up to 12x 3.5-inch Hot Swap SATA/SAS/NVMe HDDs
Rear : 2x 3.5-inch Hot Swap SATA/SAS HDDs
Display
Integrated graphics chip, 16MB
CD-ROM
Supports USB DVDRW drive
Network One dedicate management chip
Keyboard
Supports USB keyboards
Mouse
Supports USB mouse
Expansion slots
Supports up to 6 PCIe slots
Device
connectors
COM x 1
VGA x 2 (1 front, 1 rear)
USB3.0 x 3 (2 rear, 1 internal)
USB2.0 x 2 (front)
RJ45 x 1 (Management NIC),
System fan
Support hot
-
plug
Equipped with automatic energy saving and noise reduction technologies
Compatible with
Windows Server 2008 SP2 (x86) ), Windows Server 2008 R2 with SP1 (including Hyper
-
V), Windows 8.1,
Windows Server® 2012 (including Hyper-
V), Windows Server 2012 R2, SUSE LINUX Enterprise Server 11 SP3,
SUSE LINUX Enterprise Server 12, SUSE LINUX Enterprise Server 10 SP2, SUSE LINUX Enterprise Server 11
SP3, RedHat RHEL 6.5, CentOS 5.4 32bit, CentOS 6.3 64bit, Citrix XenServer 6.2
operating system
Note: The
supported
operating system
varies depending
on different
system
configurations.If
you have any
questions, please
contact Lenovo.
Supported Altitude* (unpressurized): 0-10000ft (0-3050m)
Altitude
A2: Operating temperature de-rated 1°C per 300m (1000ft) to 3050m (10000ft)
above sea level, No A3/A4 support
Ambient
temperature
(operating)
System support ASHARE A2, and A3, A4 with limitation
No specific humidity definition for A2-A4
Design by project, but if system follow ASHRAE standard, should follow below requirements
Maximum rate of change(℃/hr) should ≤ 20
Humidity transition rate should ≤10%/hr.
A2: 10℃ to 35℃.
Humidity: 8%~80% RH, Non-condensing.
A3: 5℃ to 40℃.
Humidity: 8%~85% RH, Non-condensing.
A4: 5℃ to 45℃.
Humidity: 8%~90% RH, Non-condensing.
Supported Altitude* (unpressurized): 0-10000ft (0-3050m)