Lenovo ThinkSystem HR650X - Page 18

18
Front control panel
1.
Power button with power status LED
1.
Steady green light: the server is on
2.
Off: the server is off
3.Blinking green: the server is DC off
2.
System ID
button with ID LED
1.
Steady blue light: the server is identified
2.
Off: the server is not identified.
3 P
ress 5 secs, initiate BMC reset
1.
Steady green light: the network is connected
3.
Network status LED
2.
Blinking green light: the
network is connected and active
3.
Off: the server is disconnected from the network or the server
is off
4
. System health LED
1.
Steady
yellow
light: key component failure
2. Off: the server is off, or the server is on and is working
correctly.
5.
VGA connector
6.
USB2.0 connector（x2）