Lenovo ThinkSystem HR650X - Page 26

26
1. Lift up the PCIe cage module from chassis
2. Use screwdriver to release the screws on the PCIe cage
3. Pull out the PCIe cage
To remove GPU card
1. Lift up the riser module
2. Pull out the plastic supporter (Step 1)
3. Remove the GPU card (Step 2)
To reinstall, reverse the steps above.
Special Note: Refer to the table below for the specifications and the assigned slots for PCIe cards supported by HR650X.
Slot no.
Supported
size
Slot specifications
Remark
1
Full
-
height,
×8/x16
Support 1xCPU config
Full/half
-
length
2
Full
-
height,
×8
Support 1xCPU config
Full/half
-
length
3
Full
-
height,
×8
Support 1xCPU config
half
-
length
4
Half
-
height,
×8
Support 1xCPU config
half
-
length
5
Full
-
height,
×8/x16
Does not support 1xCPU config
Full/half
-
length
6
Full
-
height,
×8
Does not support 1xCPU config
Full/half
-
length