Lenovo ThinkSystem HR650X - Page 48

©
Copyright
L
enovo
201
7
48
Network Do not launch
UEFI
Legacy
Controls the execution of UEFI and Legacy PXE
OpROM
OCP TYPE C PORT0 Enabled / Disabled Controls the execution of UEFI and Legacy PXE
OpROM
Storage Do not launch
UEFI
Legacy
Controls the execution of UEFI and Legacy Storage
OpROM
Video Do not launch
UEFI
Legacy
Controls the execution of UEFI and Legacy Video
OpROM
Other PCI devices Do not launch
UEFI
Legacy
Determines OpROM execution policy for devices
other than Network, Storage, or Video
NVMe Configuration Table(Sub of
Advanced Menu
)
NVMe Configuration NVMe Device Options Settings
NVMe controller
and Drive information
No NVME Device Found
USB Configuration Table(Sub of
Advanced Menu
)
USB Configuration
USB Configuration Parameters
USB Configuration
One blank line
USB Module Version
17
One blank line
USB Controllers:
1 XHCI
USB Devices:
1 Drive, 2 Keyboards, 3
Mice, 1 Point, 4 hub
One blank line
Legacy USB Support Enabled/Disabled/Auto Enables Legacy USB support. AUTO option disables
legacy support if no USB devices are connected.
DISABLE option will keep USB devices available only
for EFI applications.