Throttling
Disabled /
Configure Thermal Throttling Mode.
EN_MEMTR
IP
Disable/
Enable
If set to 0, processor will ignore MEMtrip. If set to 1
processor will include MEMtrip in ThermTrip tree.
PCIE per port control Table(Sub of
Advanced Menu
)
Socket 0 PcieBr1D00F0 - Port 1A
PCI-E Port Auto / Disable /Enable In auto mode the BIOS twill remove the EXP port if
there is no device or errors on that device and the
device is not HP capable. Disable is used to disable
the
Link Speed Auto
Gen 1 (2.5 GT/s)
Gen 2 (5 GT/s)
Choose Link Speed for this PCIe port
Socket 0 PcieBr1D02F0 - Port 1C
PCI-E Port Auto / Disable /Enable In auto mode the BIOS twill remove the EXP port if
there is no device or errors on that device and the
device is not HP capable. Disable is used to disable
the
Link Speed Auto
Gen 1 (2.5 GT/s)
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
Choose Link Speed for this PCIe port
PCI-E Port Auto / Disable /Enable In auto mode the BIOS twill remove the EXP port if
there is no device or errors on that device and the
device is not HP capable. Disable is used to disable
Link Speed Auto
Gen 1 (2.5 GT/s)
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
Choose Link Speed for this PCIe port
PCI-E Port Auto / Disable /Enable In auto mode the BIOS twill remove the EXP port if
there is no device or errors on that device and the
device is not HP capable. Disable is used to disable