Chapter 3. 3-1
Chapter 3. Reference information
This section contains monitor specifications, instructions to manually install the monitor
driver, troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model 60E9-MAR1-WW
Dimensions Depth
Height
Width
72.7 mm (2.86 in.)
318.17 mm (12.53 in.)
522.2 mm (20.56 in.)
Stand Tilt Range: 10° ~ 70°
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size
Maximum height
Maximum width
Pixel pitch
584.2 mm (23 in.)
286.4 mm (11.28 in.)
509.2 mm (20.05 in.)
0.2652 mm (0.01 in.)
Power input Supply voltage
Max supply current
100-240V AC
0.75-0.3 A -
Power consumption
Note: Power consumption
figures are for the monitor and
the power supply combined
Normal operation
Standby/Suspend
Off
Note: without USB/
Webcam/external
speaker
45W
<0.5W (Analog), <0.5W (Digital)
<0.3W at 100VAC and 240VAC
Video input (Analog) Interface
Input signal
Horizontal
addressability
Vertical addressability
Clock frequency
VGA
Analog Direct Drive, 75 ohm 0.7V
1920 pixels (max)
--
1080 lines (max)
205 MHz