Playing a CD
• Turn the unit ON by pressing the Power button.
• Set the Function knob (PHONO/CD/AUX/ RADIO) to CD.
• “- -” will blink for a few seconds. When no disc is loaded “no”
will appear on the display screen.
• Place a disc on the tray with the printed label facing up.
• Do not place more than one disc in the tray at a time.
• The disc must be placed in the centre of the disc tray.
If the disc is not properly inserted, it may not be possible to get the
disc out once it has closed.
• Do not force the tray by hand when it is opening and closing.
• Press the OPEN/CLOSE button ( ▲ ) to close the tray. The total
number of tracks will appear on the display screen.
• The system will start playback automatically after several seconds,
or press the PLAY/PAUSE button ( ▶‖ ) to start playback.
• Disc playback starts from the first track, and the PLAY indicator will illuminate.
• During playback, the number of the track playing will display on the screen.
• Turn the Volume knob to adjust the volume.
To Suspend Playback Temporarily
• Press the PLAY/PAUSE button ( ▶‖ ) during playback. Playback will stop at the current
position and the track number will blink on the display screen.
• To resume playback, press the PLAY/PAUSE button ( ▶‖ ) again.
• Press the STOP button ( ■ ) to stop playback.
To Skip to the Next or Previous Track
• During playback, repeatedly press the NEXT/PREVIOUS buttons
( ▶▶ ▎/ ▎◀◀) until the desired track is found. The selected track will play from the
beginning.
• In STOP mode, press the NEXT/PREVIOUS buttons (▶▶ ▎/ ▎◀◀) repeatedly until the
desired track is found. Press the PLAY/PAUSE button ( ▶‖ ) within 5 seconds to start playback
from the selected track.
• When the PREVIOUS ( ▎◀◀ ) button is pressed during playback, the track being played
will restart from the beginning. To return to the beginning of the previous track, press the
PREVIOUS button ( ▎◀◀ ) twice.
Search for Part of a Track
• During playback, hold down the NEXT or PREVIOUS buttons
( ▶▶ ▎/ ▎◀◀ ), then release when the desired section is found.
Repeat Function
• During playback, press the REPEAT button once to repeat a single track. The ‘REP’ LED
indicator light will blink.
• During playback, press the REPEAT button one more time to repeat all tracks. The ‘REP’
LED indicator light will stay lit.
Program Function
• In STOP mode, press the PROGRAM button. The display will show
To Next Page
Loading...
