EasyManua.ls Logo

Lenoxx BCD118 - Recording and File Management; Recording to USB;SD Card; File Deletion and Playback Controls

Lenoxx BCD118
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To pause playback, press the PLAY/PAUSE ( ‖) button once to halt playing. Press it
again to continue playback.
To play the previous track, press ◀◀ once or hold down continuously to rapidly
progress through previous tracks.
To play the next track, press ▶▶ once or hold down continuously to rapidly advance
through tracks.
To delete a file on your media storage device, while in playback mode, press and hold the
REC/DEL button until the “DELLED light flashes along with dLon the display. Then press
REC/ DEL again and the “DEL” LED will flash rapidly and the file will be deleted.
To delete a file on your media storage device: While in STOP mode, select the track by
pressing ▶▶ or ◀◀ , press and hold the REC/DEL button until the “DEL” LED light flashes
along with dL on the display. Then press the REC/DEL again and the “DEL LED will flash
rapidly and the file will be deleted.
To stop playback of the music track, press the /USB/SD/B button.
Encoding and Recording onto a USB Device/SD Card
This unit has the capacity to encode your traditional music media (vinyl records, cassette
tapes, CD’s, Bluetooth and Aux in device) into digital format and record it onto a USB device
or SD card as MP3 file(s).
Insert a storage device (USB or SD card) into the relevant slot.
Get your traditional music media ready for playback:
- place a record on the turntable
- insert a cassette tape into the cassette slot
- insert a CD into the CD player disc tray
- begin playback from your Bluetooth device
- connect an Aux in device to the AUX IN socket
Set the function switch to the appropriate music playback method.
NOTE: If you are recording via Cassette, make sure an AUX IN cable is not connected to AUX
socket.
Press the REC button to start recording. “rE” will appear on the display screen and the
“REC” LED will illuminate. A few seconds later the “RECLED will start flashing and recording
will begin.
Then start playing your traditional music media.
Press the STOP button to stop recording. The music track(s) will be saved directly onto
the storage device (USB device or SD card) as MP3 file(s).
NOTE:
The recording volume level can be adjusted with the Volume control knob.
The recording speed is 1:1. Recording will take as long as playing the record, cassette
tape or CD.
The recording format is preset at MP3 bit rate 128 kbps.

Related product manuals