Lenoxx BCD118 - Playing Music from an Auxiliary Input; Playing Via the 3.5 Mm AUX-IN Jack; Connecting to Headphones; Connecting to an External Amplifier

Playing Music from an Auxiliary Input:
Playing via the 3.5mm AUX-IN Jack
• Turn the unit ON by pressing the Power button.
• Set the Function knob (PHONO/CD/AUX/RADIO) to the AUX position.
• Connect one end of the 3.5mm AUX-IN cable (not supplied) into
the 3.5mm AUX-IN Jack on
the front panel of the unit and
the other end to your audio
device’s (CD player, Tablet, MP3 player etc.) headphone/Line Output.
• Press PLAY on the external audio source.
NOTE: The volume output is affected by the volume level on the
source. Ensure that the source volume is set to about 70-80% to avoid sound distortion.
NOTE: Playback cannot be controlled from the front panel when
using AUX IN mode. Playback must be controlled from your connected audio device.
Connecting to Headphones
• Adjust the volume to an appropriate level.
• Plug in your 3.5mm headphone jack to the headphone socket.
Connecting to an External Amplifier
• This feature enables you to play turntable music through and amplifier or external
speakers. You will need an RCA cable to make this connection (not supplied).
• Plug one end of the Red and White RCA jacks into the LINE OUT ports at the back of the
unit and the other end into R (red) and L (white) sockets at the back of the amplifier or
speakers.