Getting Started
Before First Use
• The unit may become hot during operation. Always leave sufficient space around the unit
for ventilation.
• The voltage supplied to the unit should match the voltage that is printed on the back
panel. If you have any doubts concerning this matter, consult an electrician.
• Avoid placing the unit in direct sunlight or close to any sources of heat. Also avoid
locations subject to vibrations and excessive dust, heat, cold or moisture.
• Do not place the unit on an amplifier or receiver.
• Do not open the cabinet as this might result in damage to the circuits or an electric shock.
If a foreign object gets into the unit, contact your dealer or service company.
• When removing the power plug from the wall outlet, always pull directly on the plug. Do
not pull on the cord.
• To keep laser pickup clean, do not touch it and always close disc tray.
• Do not clean the unit with chemical solvents as this may damage the finish. Use a clean,
dry cloth.
• Keep this manual in a safe place for future reference.
• During playback, the disc rotates at high speeds. Do not move or lift the unit during
playback as this may damage the unit and the disc.
• When moving the unit to a different location or packing the unit away, be sure to remove
the record or disc. Moving the unit with a disc or record inside may cause damage to the
unit.
To Next Page
Loading...
