Lenoxx CD114BL - Cassette Recording; Recording from Sources

1. Press the volume knob to turn on the power.
2. Select the TAPE function to set the unit to tape mode.
3. Press the Stop/Eject button to open the cassette door.
4. Insert the prerecorded cassette into the cassette tray and press the play
button.
5. To fast forward, press the fast forward button. To stop fast forwarding,
press Play button or Stop/Eject button. Press the Play button to play.
6. To rewind, press the Rewind button in. To stop rewinding, press Play
button or Stop/Eject button. Press the Play button to play.
7. To stop the playback, press the Stop/Eject button once. To eject the
cassette, press the Stop/Eject button again.
Note: Remove the cassette from the cassette holder when it is not in use.
Recording from RADIO / PHONO / AUX IN / CD / USB / SD to
TAPE:
1. While playing the source (RADIO / PHONO / AUX IN / CD / USB /
SD), press the “Tape EJECT” button to open the tape door.
2. Insert a blank tape into the Cassette Dock.
3. Close the tape door securely.
4. Simultaneously press the “RECORDER” and “PLAYER” buttons to prepare
for recording.
5. Now, begin playing the songs or content you wish to record onto the
tape.
6. If you need to pause the recording, press the “PAUSE” button. Press it
again to continue recording.
7. To stop the recording, press the “STOP” button.
NOTE:
When the tape reaches its full-end during recording, the “RECORDER &
PLAYER” buttons will automatically key-up.