Lenz Digital plus - XPA Capabilities and System Compatibility

24
With XPA you can:
• control and call on 9999 digital locomotives. The address 0 is used to control
one conventional locomotive in the digital power circuit
• switch 8 functions in locomotive decoders.
• control multiple tractions which were assembled with a different XpressNet
device.
• switch 1024 points and signals.
• carry out device settings.
The XPA can be connected to the following components of the
Digital
DigitalDigital
Digital plus
plus plus
plus by
by by
by Lenz
Lenz Lenz
Lenz
®
®®
®
system: LZ100; SET02; SET03;
compact
compactcompact
compact
The operation of the XPA requires the software version 3 of the Digital plus
system.
The XPA cannot be used with devices which use an older software version. If
applicable, check whether updates are available for your devices.