35
9 Audio signals
After answering the phone you can hear the following signals:
Audio sequence: You can alter a locomotive or point address or the device
settings.
Engaged tone: You cannot send commands to the command station. The
cause is probably a wrong XpressNet connection or the
device is not addressed by the command station. Check
whether the set XpressNet address is used by the command
station.
Short deep tone: An entry (command) cannot be made. Cause: the chosen
action cannot be carried out with the command station used.
Example: You would like to select a 4-digit locomotive
address at the "compact".
To Next Page
Loading...
