34
stopped, voltage on the track remains switched on)
50 - 60
11 different times for the period of a temporary function
from approx. 0.2 to 2 sec.
99
Resetting the XPA to ex-works settings:
XpressNet address: 1
Default locomotive address: 3
Setting key "0": Emergency stop
Time for temporary function: 50
If a setting has been successfully changed, you will hear a short sequence of tones.
Afterwards, the version number will be indicated by low tones as follows:
1 low tone = version 1, 2 low tones = version 2, etc.
If the system could not be set successfully, you will hear a short, low tone. In this
case, separate the XPA briefly from the XpressNet and the connected phone. Try the
setting again.
To Next Page
Loading...
