Lenz Digital plus - Device Settings and Operation; Procedure for Device Settings; Available Device Settings

33
8 Device settings
Device settings can only be carried out directly after answering the phone. Use the
following procedure:
1.
Press "Answer".
2. Press "Asterisk".
3.
...
Enter the number for the desired setting (see below).
4. Press "Asterisk".
5. Press "Replace".
The following settings can be carried out:
Number Setting
1 - 31
New XpressNet address
40
Key "0" triggers an emergency shutdown (voltage on the
track is switched off)
41
Key "0" triggers an emergency stop (locomotives are