This documentation applies to the optional PROFIBUS-DP communications module for the SMVector inverter
and should be used in conjunction with the SMVector Operating Instructions (Document SV01) that shipped with
the drive. These documents should be read carefully as they contain important technical data and describe the
installation and operation of the drive.
© 2007 AC Technology Corporation
No part of this documentation may be copied or made available to third parties without the explicit written approval
of AC Technology Corporation. All information given in this documentation has been carefully selected and tested
for compliance with the hardware and software described. Nevertheless, discrepancies cannot be ruled out. AC
Tech does not accept any responsibility nor liability for damages that may occur. Any necessary corrections will be
implemented in subsequent editions.
About These Instructions
To Next Page
Loading...