Preface and general information
Lenze drive systems
Labelling
1
7
BA 12.0028−EN 6.0
1.4 Lenze drive systems
1.4.1 Labelling
Lenze drive systems are uniquely designated by the content of their nameplates.
Manufacturer
Lenze Drives GmbH
Postfach 10 13 52
D−31763 Hameln
Application as directed
ƒ Lenze drive systems
– are intended for use in machinery and plant,
– must only be used for the purposes ordered and confirmed,
– must only be operated under the ambient conditions prescribed in these
Operating Instructions,
– must not be operated beyond their corresponding power limits.
Any other use shall be deemed inappropriate!
1.5 Legal regulations
Liability
ƒ The information, data, and notes in the Operating Instructions were state of the art
at the time of printing. Claims referring to drive systems which have already been
supplied cannot be derived from the information, illustrations, and descriptions.
ƒ We do not accept any liability for damage and operating interference caused by:
– inappropriate use,
– unauthorised modifications to the drive system,
– improper working on and with the drive system,
– operating faults,
– disregarding the Operating Instructions.
Warranty
ƒ Conditions of warranty: see terms of sale and delivery of Lenze Drive Systems
GmbH.
ƒ Warranty claims must be made to Lenze immediately after detecting the deficiency
or fault.
ƒ The warranty is void where liability claims cannot be made.
To Next Page
Loading...
Need help?
General
