Need help?Do you have a question about the Lenze 8400 TopLine C and is the answer not in the manual?
General| Category | DC Drives |
|---|---|
| Protection Class | IP20 |
| Cooling Method | Forced air cooling |
| Type | C |
| Communication Interfaces | CANopen, Ethernet, PROFIBUS |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000 m above sea level |
| Operating Temperature | 0°C to +40°C |
Provides essential safety measures for handling Lenze controllers to prevent injury or damage.
Outlines safety guidelines for Lenze motors, including operation and handling.
Identifies potential dangers and risks associated with the device operation and installation.
Illustrates and describes the control terminals for StateLine, HighLine, and TopLine versions.
Provides detailed electrical specifications for various operating voltages and conditions.
Explains current derating based on switching frequency and mains voltage.
Provides an overview and numbering of connection terminals for different device sizes.
Details installation methods for devices in the 0.25-3 kW range, including filter options.
Details installation methods for devices in the 3-22 kW range, including filter options.
Provides guidelines for EMC-compliant installation, including shielding and cable routing.
Details external supply, analog, and digital terminal assignments for StateLine C.
Details external supply, analog, digital, and motor brake terminal assignments for HighLine C.
Details axis bus connections for TopLine C devices.
Outlines essential checks and parameter settings required before initial power-on.
Details requirements and specifications for using external brake resistors.
Covers critical notes on application, installation, and safety functions like STO.
Provides rated data for external brake resistors.
To Next Page
