Lenze 8603 E.6x.6 Series - Connecting Module 2110 IB− Interbus-S; Connecting Module 2130 IB− PROFIBUS

50

7 Accessories for networking
We will be pleased to send you further information detailing these
accessories on request.
7.1 Connecting module 2110IB− InterBus-S
Features:
• Additional module for the Lenze series 4900, 8600, 9200
• Slave connection module for the communication system
InterBus-S
• Can be integrated into the base controllers
• Can be combined with the automation modules 2211PP,
2212WP
• Participants of peripheral bus in the InterBus-S system
• Standardized parameters and controller functions according to
the DRIVECOM profile 21
• Access to all Lenze parameters
• Fast cyclic and time-equidistant data exchange
• LECOM A/B interface at the inverter remains active
• Intelligent module with 16-bit microprocessor
7.2 Connecting module 2130IB− PROFIBUS
Features:
• Additional module for the Lenze series 4900, 8600, 9200
• Slave connection module for the communication system
PROFIBUS with the communication profiles PROFIBUS-FMS
and PROFIBUS-DP
• Bus connection to RS485 standard, or optical fibre cables
according to SINEC-L2FO
• Baud rate from 93.75 kbaud to 1.5 Mbaud
• Channel for parameter setting for PROFIBUS-DP as option
• Can be combined with the automation modules 2211PP,
2212WP
• Standardized parameters and controller functions according to
the DRIVECOM profile 21
• Access to all Lenze parameters
• LECOM A/B interface at the inverter remains active
• Intelligent module with 16-bit microprocessor