Parameter setting
Parameter setting using the keypad
1
l
EDKVF9333 EN 1.0
2 Parameter set t ing
•
T he parameter setting of the controller is used to adapt the drive to your applications.
•
T he complete parameter set is organized in codes which are consecutively numbered and
alwaysbeginwith”C”.
•
You can save the parameter set of an application.
– Four parameter sets ar e available, so that the controller can be adjusted rapidly fr om one
application to another.
– When delivered, the parameter sets have the factory-set default values.
2.1 Ways of parameter setting
Parameters can be changed through:
•
Akeypad
•
A superimposed host (PC or PLC) via fieldbus modules and operating programs.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - e.mail: info@ctiautomation.net
To Next Page
Loading...
