What to do if Lenze DC Drive does not start?
If your Lenze DC Drive isn't starting, it could be due to a few reasons. First, check the connection because the voltage supply might be interrupted. Also, a faulty electrical connection could be the culprit, so ensure the supply voltage matches the data on the nameplate. Finally, excessive load can prevent starting, so reduce the load and check the drive/machine assignment.
Why is my Lenze DISCO GST temperature excessive?
Excessive temperature in your Lenze DC Drive can stem from several causes. Overload may be the issue, so reduce the load and check the drive/machine assignment. Insufficient heat dissipation could also be to blame; improve cooling airflow and clean the gearbox/motor. Lastly, check for a lack of lubricant and top it up according to regulations.
How to troubleshoot unusual running noise in Lenze DISCO GST?
Unusual running noise in your Lenze DC Drive can be caused by an overload, so reduce the load and check the drive/machine assignment. It may also indicate damage to the gearbox or motor, in which case you should inform Lenze Service.
What to do if motor runs, gearbox does not in Lenze DC Drives?
If the motor of your Lenze DC Drive runs but the gearbox doesn't, it could be due to missing or defective coupling components; check the mounting. Alternatively, the gearbox itself might be defective, in which case you should inform Lenze Service.
Why are fixing elements loose on my Lenze DC Drives?
Loose fixing elements in Lenze DC Drives are often caused by vibrations. To resolve this, avoid vibrations.
Explains the coding system used for product identification and configuration.
Details the components and information found on the nameplate for non-rear-mounted gearboxes.
Details the components and information found on the nameplate for rear-mounted gearboxes.
Illustrates various mounting positions (A-F) and system module configurations for helical gearboxes.
Details configurations for DISCO gearboxes with helical-bevel and helical-worm designs.
Specifies configurations for DISCO variable speed drives without rear-mounted gearboxes.
Provides an overview of the document's purpose, scope, and intended audience.
Defines key terms and abbreviations used throughout the manual.
Explains what components are included in the product delivery.
Describes the identification and labelling of Lenze drive systems via nameplates.
Covers legal aspects, liability for damages, and warranty conditions.
Defines operator and skilled personnel roles for safe drive system operation.
Provides essential safety guidelines and precautions for drive system usage.
Explains pictographs and signal words used for safety and informational notes.
Describes the mechanical components and operating principle of the DISCO variable speed drive.
Lists the weights of different DISCO gearbox and drive combinations for transport.
Specifies permissible ambient temperatures and environmental conditions for operation.
Provides guidelines for storing the DISCO drive before installation.
Details procedures for mounting the drive system on a suitable surface.
Instructions for correctly connecting the main motor to the DISCO drive.
Covers connecting the adjustment device and performing an operational check.
Lists pre-commissioning checks required before starting the drive.
Provides guidance on monitoring and periodic checks during drive operation.
Specifies the correct oil quantities for various DISCO gearbox sizes and mounting positions.
Recommends specific lubricant types and manufacturers for DISCO variable speed drives.
Illustrates the correct positions for ventilation, oil filling, and drain plugs on the gearbox.
Outlines maintenance schedules, lubricant replacement, and spare parts information.
Lists common faults, their possible causes, and recommended solutions.
Provides guidelines for the environmentally sound disposal of product materials.
Lists part numbers and diagrams for DISCO variable speed drive size 02.
Lists part numbers and diagrams for DISCO variable speed drive size 03.
Lists part numbers and diagrams for DISCO variable speed drive sizes 04 through 07.
Lists part numbers and diagrams for DISCO variable speed drive sizes 08 through 18.
Lists part numbers for the speed adjustment mechanism of sizes 02 through 07.
Lists part numbers for the speed adjustment mechanisms of sizes 08 through 18.
To Next Page
General